Skip to main content
Release: 24.03 (deprecated)

CX - 0052 Aspect Model "ManufacturingCapability" v1.0.0

FOR WHOM IS THE STANDARD DESIGNED

ABSTRACT

Manufacturing-as-a-Service (MaaS) scenarios focus on connecting buyers looking for specific products with manufacturers in possession of the available production know-how and resources.

Sharing information about the required and available manufacturing capabilities in an interoperable manner is fundamental for any MaaS solution providing basic and value-added services such as automated search and matchmaking.

A common description of the manufacturing capabilities based on a standardized semantic definition is therefore key for facilitating such an information exchange between Catena-X participants.

1 INTRODUCTION

This document describes the “ManufacturingCapability" aspect model used in the Catena-X network.

1.1 AUDIENCE & SCOPE

This standard is relevant for the following roles defined in [CX-OMW]:

  • Business Application Provider providing Manufacturing-as-a-Service solutions
  • Data Provider willing to provide information about required or available capabilities
  • Data Consumer interested in requesting information about required or available capabilities
  • On-Boarding Service Provider supporting the onboarding of participants with their business and capability information
  • Enablement Service Provider that support the workflow regarding the derivation and refinement of participants capabilities

The scope of this standard is only the “ManufacturingCapability” aspect model.

1.2 CONTEXT AND ARCHITECTURE FIT

This section is non-normative

Buyers occasionally need to search for manufacturers or specific manufacturing process steps. The reasons for that might be that production at their own premises is currently not possible due to resource or capacity bottlenecks (e.g. material shortage, machine defect, no machine with required capabilities available, etc.), that other suppliers are currently not able to deliver a particular product, or that a prototype of a new product is needed before a production and investment decision is made. Instead of searching for the right supplier based on already existing but possibly limited contacts, Catena-X MaaS enables the distribution of a pre-configured manufacturing request across a network of ODM platforms and supplier networks in a domain-independent and IP-secure manner.

Buyers looking for manufacturers to purchase specific products or manufacturing process steps from, must provide specific information on how the products should be manufactured. This includes the required manufacturing capabilities that a manufacturer needs to possess in order to manufacture the desired product or perform the manufacturing process steps. Manufacturers, on the other hand, are interested in providing information about their know-how and available capabilities, making them discoverable for potential buyers and allowing them to acquire new customers, orders and projects.

The standardized "ManufacturingCapability" model defined in this document is a first step towards a common interpretability of manufacturing capabilities by all participants in a Manufacturing-as-a-Service scenario. It therefore fosters the interoperability of suppliers and buyers in the manufacturing industry, enabling faster alignment with less effort and making collaboration less error-prone.

1.3 CONFORMANCE AND PROOF OF CONFORMITY

This section is non-normative

As well as sections marked as non-normative, all authoring guidelines, diagrams, examples, and notes in this specification are non-normative. Everything else in this specification is normative.

The key words MAY, MUST, MUST NOT, OPTIONAL, RECOMMENDED, REQUIRED, SHOULD and SHOULD NOT in this document document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

All participants and their solutions will need to prove, that they are conform with the Catena-X standards. To validate that the standards are applied correctly, Catena-X employs Conformity Assessment Bodies (CABs).

The proof of conformity for a single semantic model is done according to the general rules for proving the conformity of data provided to a semantic model or the ability to consume the corresponding data.

1.4 EXAMPLES

The following JSON provides an example for the value-only serialization of the "ManufacturingCapability" aspect model.

{
"resourceSet": [
{
"provides": [
{
"capabilityLabel": "drilling"
}
]
}
],
"capabilitySet": [
{
"capabilityLabel": "drilling"
}
],
"processSet": [
{
"hasInput": [
{
"productLabel": "wheel suspension"
}
],
"hasOutput": [
{
"productLabel": "wheel suspension"
}
],
"requires": [
{
"capabilityLabel": "drilling"
}
]
}
],
"capabilityConstraintSet": [
{
"references": [
{
"propertyLabel": "diameter"
}
]
}
],
"productSet": [
{
"productLabel": "wheel suspension"
}
]
}

1.5 TERMINOLOGY

This section is non-normative

Aspect Model : a formal, machine-readable semantic description (expressed with RDF/turtle) of data accessible from an Aspect.

Business Partner Number (BPN) :  A BPN is the unique identifier of a partner within Catena-X as defined in [CX-0010].

Buyer : Person (or organization) using a manufacturing service, e.g. the milling and drilling to produce a part of their own design.

Manufacturer : Organization providing a manufacturing service to others, such as milling or drilling.

Resource : A (Production) Resource is a function unit needed to perform required operations. It differs from other resources such as energy or raw materials. [Patzer-2023]

Capability : A Capability is an Entity which represents a designated function to achieve an effect in the physical or virtual world [Plattform Industrie 4.0]. Inherits relations from Entity. [Patzer-2023]

Process : A process is a set of interacting operations in a system by which matter, energy or information is transformed, transported or stored [IEV 351-42-33]. A Process may contain sub-processes. A process is a set of process steps or a single process step. Inherits relations from Entity. [Patzer-2023]

Product : A Product is a material good or an (immaterial) service offering which is an outcome (output product) or an input (input product) of a Process. Inherits relations from Entity and Asset. [Patzer-2023]

Property : A Property is an attribute of an Entity which might - but does not need to have – data. [Patzer-2023].

Additional terminology used in this standard can be looked up in the glossary on the association homepage.

2 ASPECT MODEL “ManufacturingCapability”

This section is normative

2.1 INTRODUCTION

The "ManufacturingCapability" aspect model defines concept which represent the commonalities of Process, Product, Resource, Capability and CapabilityConstraints representing a designated function to achieve an effect in the physical or virtual world.

The following table provides an overview and a brief descriptions of the most important fields defined in the "ManufacturingCapability" aspect model. A link to the complete model is available in Chapter 2.5.1.

FieldDescription
resourceSetSet of entities capable of performing functions specified as capabilities.
capabilitySetSet of implementation-independent specifications of functions in industrial production to achieve an effect in the physical or virtual world.
processSetSet of production-relevant activities at any level of granularity that might affect materials and is performed by resources.
productSetSet of physical objects being used as an input or created as an output of a production process.
capabilityConstraintSetSet of conditions imposed on capabilities which further detail their applicability.
providesRelation between a resource and capabilities it provides.
hasInputRelation between a process and its input products.
hasOutputRelation between a process and its output products.
requiresRelation between a process and capabilities it requires.
referencesRelation between a capability constraint and its properties.
capabilityLabelHuman readable label of a capability.
productLabelHuman readable label of a product, e.g. the name.
propertyLabelHuman readable label of a property.

The "ManufacturingCapability" aspect model is automotive-agonistic, thus allowing for future integration and exchange with non-automotive dataspaces.

2.2 SPECIFICATION ARTIFACTS

The modeling of the semantic model specified in this document was done in accordance to the "semantic driven workflow" to create a submodel template specification SMT.

This aspect model is written in SAMM 2.0.0 as a modeling language conformant to [CX-0003] as input for the semantic deriven workflow.

Like all Catena-X data models, this model is available in a machine-readable format on GitHub conformant to [CX-0003].

2.3 LICENSE

This Catena-X data model is made available under the terms of the Creative Commons Attribution 4.0 International (CC-BY-4.0) license, which is available at Creative Commons.

2.4 IDENTIFER OF SEMANTIC MODEL

The semantic model has the unique identifier

  urn:bamm:io.catenax.manufacturing_capability:1.0.0

This identifier MUST be used by the data provider to define the semantics of the data being transferred.

2.5 FORMATS OF SEMANTIC MODEL

2.5.1 RDF TURTLE

The rdf turtle file, an instance of the Semantic Aspect Meta Model, is the master for generating additional file formats and serializations. It can be found under the following link:

https://github.com/eclipse-tractusx/sldt-semantic-models/blob/main/io.catenax.manufacturing_capability/1.0.0/ManufacturingCapability.ttl

The open source command line tool of the Eclipse Semantic Modeling Framework is used for generation of other file formats like for example a JSON Schema, aasx for Asset Administration Shell Submodel Template or a HTML documentation.

2.5.2 JSON SCHEMA

A JSON Schema can be generated from the RDF Turtle file. The JSON Schema defines the Value-Only payload of the Asset Administration Shell for the API operation "GetSubmodel".

2.5.3 AASX

An AASX file can be generated from the RDF Turtle file. The AASX file defines one of the requested artifacts for a Submodel Template Specification conformant to [SMT].

2.6 SEMANTIC MODEL

Not applicable. (See Chapter 2.5.1)

3 REFERENCES

3.1 NORMATIVE REFERENCES

    [Optional] - Links to related Catena-X or external standards that need to be
meet in order to fulfil this standard. If no external standards need to be
met, leave empty.

[CX-0002] Digital Twins in Catena-X

[CX-0003] SAMM Aspect Meta Model

[CX-0010] Business Partner Number

3.2 NON-NORMATIVE REFERENCES

This section is non-normative

    [Optional] – Links to further documentation that may help to understand the 
standard but isn’t relevant for conformity assessment

[SMT] How to create a submodel template specification. Guideline. Download from: https://industrialdigitaltwin.org/wp-content/uploads/2022/12/I40-IDTA-WS-Process-How-to-write-a-SMT-FINAL-.pdf

[CX-OMW] Catena-X Operating Model Whitepaper. Download from: https://catena-x.net/fileadmin/user_upload/Publikationen_und_WhitePaper_des_Vereins/CX_Operating_Model_Whitepaper_02_12_22.pdf

[Plattform Industrie 4.0] Plattform Industrie 4.0. Discussion paper: Information Model for Capabilities,Skills & Services, 2022. Available online: https://www.plattform-i40.de/IP/Redaktion/DE/Downloads/Publikation/CapabilitiesSkillsServices.pdf?__blob=publicationFile&v=1 (accessed on 24 May 2023).

[IEV 351-42-33] International Electrotechnical Commission. IEC TS 62443-1-1:2009: Industrial communication networks - Network and system security - Part 1-1: Terminology, concepts and models, 2009 (1.0). Available online: https://webstore.iec.ch/publication/7029 (accessed on 24 May 2023).

[Patzer-2023] Patzer, F.; Schnebel, B.; Schöppenthau, F.; Watson, K. Smart Factory Web Ontology Specification: Version 1.0. Available online: https://www.smartfactoryweb.de/docs/models/SFW_Ontology_Spec_1.0.pdf (accessed on 24 May 2023).

[RFC2119] Bradner, S. Key words for use in RFCs to Indicate Requirement Levels. Available online: https://datatracker.ietf.org/doc/html/rfc2119 (accessed on 07 August 2023).

[RFC8174] Leiba, B. Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words. Available online: https://datatracker.ietf.org/doc/html/rfc8174 (accessed on 07 August 2023).

3.3 REFERENCE IMPLEMENTATIONS

This section is non-normative

Not applicable.

ANNEXES

FIGURES

This section is non-normative

Not applicable.

TABLES

This section is non-normative

Not applicable.

Copyright © 2024 Catena-X Automotive Network e.V. All rights reserved. For more information, please visit here.