Skip to main content
Release: CX-Jupiter (current)

Introduction

ABSTRACT​

This standard focuses on the digital product passport use case. This includes relevant requirements for

  • data provider, that want to provide different passports through Catena-X,
  • data consumer, that are searching for different passports in Catena-X, and
  • application developer / provider supporting the provisioning and consuming of passport data.

Specific passports that shall be mentioned here are the battery passport and the transmission passport, which are first realizations of product passports in Catena-X.

In this document, keywords for registering and searching digital twins and their passports submodels are defined.

FOR WHOM IS THE STANDARD DESIGNED​

See the audience and scope 1.1

Scope​

The Digital Product Passport (DPP) allows to share process and product-related information amongst supply chain businesses, authorities and consumers. The DPP allows for efficient information flows following best practices; and the possibility of accompanying the measures under this Regulation with mitigating measures so that impacts are expected to remain proportionate for SMEs. This is expected to increase transparency, both for supply chain businesses and for the general public, and increase efficiencies in terms of information transfer to support the data exchange between economic actors in integrating circularity in product design and manufacturing. In particular, it is likely to help facilitate and streamline the monitoring and enforcement of the regulation carried out by EU and Member State authorities. It is also likely to provide a market-intelligence tool that may be used for revising and refining obligations in the future.

AUDIENCE & SCOPE​

This section is non-normative

This document is meant for the following roles:

  • Data Provider / Consumer
  • Business Application Provider

The standard is of interest to all members of the automotive supply chain including suppliers, OEMs, dismantler, recyclers and stakeholders within the recycling industry and the circular economy.

Additionally, the standard also applies to software providers and core service providers to ensure interoperability and data sovereignty between different core service providers. The scope of this standard is to define mandatory components, logics and data models as well as give guidance for the provisioning and consuming of product pass information.

CONTEXT AND ARCHITECTURE FIT​

This section is non-normative

Manufacturers of physical goods will have to provide information on different aspects of their products, including components or ingredients, information about the manufacturing itself or information relevant to optimize aspects of repair, reusability or recycling. This information is stored in in an aggregated form in a "passport", providing information on instances of the product.

Different stakeholders shall be able to read these passports such as legal authorities, dismantler, as well as the owner of the product in sense of public persons.

This standards defines the basic interactions with passport information as standard for the use case "digital product passport". It is implemented in a first reference application which can be found in section 6.3 REFERENCE IMPLEMENTATION.

This image depicts an overall image of the architecture this standard relates to. Further information can be read in the Eco Pass KIT. The standards related to these components are mentioned in more detail in 2.1.1 LIST OF STANDALONE STANDARDS. Further architecture diagrams for the interactions are presented in FIGURES.

Architectural Overview

CONFORMANCE AND PROOF OF CONFORMITY​

This section is non-normative

As well as sections marked as non-normative, all authoring guidelines, diagrams, examples, and notes in this specification are non-normative. Everything else in this specification is normative.

The key words MAY, MUST, MUST NOT, OPTIONAL, RECOMMENDED, REQUIRED, SHOULD and SHOULD NOT in this document document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

All participants and their solutions will need to proof, that they are conform with the Catena-X standards. To validate that the standards are applied correctly, Catena-X employs Conformity Assessment Bodies (CABs).

All participants and their solutions will need to proof, that they are conform with the Catena-X standards. To validate that the standards are applied correctly, Catena-X employs Conformity Assessment Bodies (CABs). Please refer to the certification information page for the process of conformity assessment and certification. Since this standard document describes a set of standards to be fulfilled, participants MUST fulfill all mentioned standards listed at 2.1.1 LIST OF STANDALONE STANDARDS and the respective conformity assessment criteria in addition to the specific criteria mentioned in this document. The specific criteria described in this document are describing the usage of the central tools as well as common tools described in the linked standardization documents and therefore compliance should be checked with the tools provided for these components.

In order to proof conformity with this use case digital product pass standard as a data consumer or app provider demonstrate that you

In order to proof conformity with this use case digital product pass standard as data provider show that you

EXAMPLES​

This section is non-normative

The following examples can be checked as they offer further explanations and guidance how to stay compliant with the standard:

TERMINOLOGY​

This section is non-normative

Use case relevant terminologies and explanations can be found in the Eco Pass KIT

The following terms are especially relevant for the understanding of the standard:

  • Asset Administration Shell (AAS): The AAS is the chosen standard in Catena-X to define digital twins of an asset (e.g. a battery or a full vehicle). The AAS, developed by the Industrial Digital Twin Association is the standardized digital representation of an digital twin asset, the corner stone for the interoperability of Industry 4.0 components organized in Industry 4.0 systems.
  • Business Partner Number (BPN): A BPN is the unique identifier of a partner within Catena-X as standardized in CX-0010 Business Partner Number.
  • Ecodesign for Sustainable Products Regulation (ESPR): The proposed regulation to improve EU products’ circularity, energy performance and other environmental sustainability aspects.
  • Digital Product Passport (DPP): The Digital Product Passport is the core model of this standard. It can be used as the root class for other, specific, product models. The Passport itself is defined by the usage of Catena-X shared services, a standardized data model and an application which will enable stakeholders to access the relevant data.

Copyright © 2024 Catena-X Automotive Network e.V. All rights reserved. For more information, please visit here.